Application Software


To connect, configure, tune your motor or upgrade the firmware of the Triton Go, install Ingenia Motion Lab suite. The software package includes USB drivers.

Keep the firmware updated

Before configuring your drive for a new application make sure you have upgraded to the latest firmware revision.


If you want to make your own application to communicate with the Triton Go and develop standalone or multiaxis systems you can use the multi-platform library MCLIB.


To start an Arduino based project easily, connect using the serial RS485 port of the Triton Go and use our Arduino Library Ardulib.

Please make sure that your Arduino board has a RS232 port, or that a suitable adaptor is used.