Pluto Product Manual

General Information

Manual revision history

RevisionRelease DateChanges
v1January 2013Initial Version. For Pluto 1.0.0B1 and 1.0.1R.
v2April 2014Update for hardware revision 1.1.0R
v3March 2016Several improvements after revision 2.0.1R
v4April 2016Added EtherCAT information. Structure improvements.
v5November 2016Minor improvements.
v6March 2017Aesthetics and structure improvements. Wiring information improved.
v7May 2017Improved PDF export format.
v8February 2020Minor corrections. Added automated PDF exporter. 
v9October 2020Added changes for Pluto revision 3.0.Download PDF

Please refer to Hardware revisions for information on previous hardware revisions and changes.

Disclaimers and limitations of liability

The information contained within this document contains proprietary information belonging to INGENIA-CAT S.L..
Such information is supplied solely for the purpose of assisting users of the product in its installation.

INGENIA-CAT S.L. rejects all liability for errors or omissions in the information or the product or in other documents mentioned in this document. 

The text and graphics included in this document are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.

This document may contain technical or other types of inaccuracies.The information contained within this document is subject to change without notice and should not be construed as a commitment by INGENIA-CAT S.L.INGENIA-CAT S.L. assumes no responsibility for any errors that may appear in this document.

Some countries do not allow the limitation or exclusion of liability for accidental or consequential damages, meaning that the limits or exclusions stated above may not be valid in some cases. 

Contact

INGENIA-CAT, S.L.
C/ Avila 124, 2-B
08018 Barcelona 
SPAIN

Telephone: +34 932 917 682
E-mail: hello@ingeniamc.com
Web site: www.ingeniamc.com