Manual revision history
|v1||December 2015||Preliminary draft.||--|
|v2||February 2016||Manual public release.||Download|
|v3||April 2016||Added EtherCAT information. Structure improvements.||Download|
|v4||November 2016||Minor improvements.||Download|
|v5||February 2017||Aesthetics and structure improvements. Wiring information improved.||Download|
|v6||May 2017||Improved PDF export format.||Download|
|v7||January 2019||Fixed broken images links||Download|
For the most up to date information use the online Nix Product Manual. The PDF manual is generated only after major changes.
Please refer to product hardware revisions page for information on previous hardware revisions and changes.
Disclaimers and limitations of liability
The information contained within this document contains proprietary information belonging to INGENIA-CAT S.L..
Such information is supplied solely for the purpose of assisting users of the product in its installation.
INGENIA-CAT S.L. rejects all liability for errors or omissions in the information or the product or in other documents mentioned in this document.
The text and graphics included in this document are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.
This document may contain technical or other types of inaccuracies.The information contained within this document is subject to change without notice and should not be construed as a commitment by INGENIA-CAT S.L.. INGENIA-CAT S.L. assumes no responsibility for any errors that may appear in this document.
Some countries do not allow the limitation or exclusion of liability for accidental or consequential damages, meaning that the limits or exclusions stated above may not be valid in some cases.
C/ Avila 124, 2-B