Everest XCR - Product manual

General Information

Manual revision history

RevisionRelease DateChanges


Initial version


Added safety-related indications, expanded STO information, added commissioning guide. Reordered manual structure. 


Cahnges according to Safe Torque Off (STO) certification.Export as PDF

For the most up to date information use the online Product manual.

Disclaimers and limitations of liability

The information contained within this document contains proprietary information belonging to INGENIA-CAT S.L.

Such information is supplied solely for the purpose of assisting users of the product in its installation.

INGENIA-CAT S.L. rejects all liability for errors or omissions in the information or the product or in other documents mentioned in this document. 

The text and graphics included in this document are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.

This document may contain technical or other types of inaccuracies. The information contained within this document is subject to change without notice and should not be construed as a commitment by INGENIA-CAT S.L.

INGENIA-CAT S.L. assumes no responsibility for any errors that may appear in this document.

Some countries do not allow the limitation or exclusion of liability for accidental or consequential damages, meaning that the limits or exclusions stated above may not be valid in some cases. 


C/ Avila 124, 2-B
08018 Barcelona

Telephone: +34 932 917 682
E-mail: hello@ingeniamc.com
Web site: www.ingeniamc.com